Searchresult: 50 hits with "Material: Plastics"

Twin Table System with permanent vacuum

Twin Table System with permanent vacuum

The Twin Table System increases your profitability. While one side of the material carrier is being cut, the other side can be reloaded. In addition, a permanent vacuum under the material ensures opti More details...

POS+ professional - Optimal processing of printed materials

POS+ professional - Optimal processing of printed materials

The POSITION+professional camera recognition system captures the entire work area using an area scan. This speeds up the process time by up to 90%. By reading QR/barcodes, various application jobs inc More details...

Advantages of non-contact laser processing

Advantages of non-contact laser processing

Your material is cut and engraved without contact, so that there is no breakage, material distortion or crushing. Placement is extremely simple and there is no need to fix the workpieces. Benefit from More details...

Automated processing with unique application possibilities. NEW!

Automated processing with unique application possibilities. NEW!

Save time and automate your processing! 1. scan the QR or barcode 2. associated job file is opened 3. suitable parameters are retrieved 4. process starts fully automatically The new POSITIONplus prof More details...

Contour detection of already printed workpieces. NEW!

Contour detection of already printed workpieces. NEW!

With POSITIONplus professional you can scan printed workpieces or materials with existing contours and have the cutting data automatically created and positioned. In this way, you can cut with contour More details...

Over 90% time saving - POSITION PLUS PROFESSIONAL

Over 90% time saving - POSITION PLUS PROFESSIONAL

The area scan detects all fiducial marks and printed contours by scanning the entire work area once. The time for scanning fiducial marks is significantly reduced. The contour detection can signific More details...

Neoprene | Laser cutting and engraving

Neoprene | Laser cutting and engraving

Many people are familiar with Neoprene from water sports clothing, the thermally insulating wetsuit. However, the material is actually called chloroprene rubber or polychloroprene and has many uses. I More details...

JobIDENT - eurolaser software for automation of the machining process

JobIDENT - eurolaser software for automation of the machining process

LaserScout JOBIDENT enables the assignment of different application jobs by the reading out of the existing QR code. The job file identified is uploaded in the user interface automatically and the pro More details...

Seat cushion made of spacer fabrics | Laser cutting

Seat cushion made of spacer fabrics | Laser cutting

Cutting spacer fabrics without crushing The special feature of spacer fabrics is the material thickness, the third dimension of this textile. Spacer threads keep two textile surfaces at a distance fr More details...

Virtual Customer Visit - eurolaser demo

Virtual Customer Visit - eurolaser demo

NEW: VIRTUAL DEMOS You want to further advance your business? For everyone interested in the possibilities of laser application, we offer free virtual demos and sampling. We tailor every virtual custo More details...

Laser cutting of thermoplastic prepregs | Laserschneiden von thermoplastischen Prepregs

Laser cutting of thermoplastic prepregs | Laserschneiden von thermoplastischen Prepregs

Compared to conventional materials, thermoplastic prepregs can save a lot of weight and costs while optimising the stability of components. However, the high degree of stability of the fabric has also More details...

Efficient processing of plastic films | laser cutting

Efficient processing of plastic films | laser cutting

eurolaser offers you especially developed CO2 laser cutter for plastic films The cutting of foils with CO2 laser systems is characterised by high precision and flexibility. Laser cutter are mostly fa More details...

Machining of acrylic | Laser cutting and engraving

Machining of acrylic | Laser cutting and engraving

The perfect solution for cutting acrylic The CO2 laser is the ideal tool for cutting and engraving acrylic glass (PMMA). Our many years of experience in the manufacture of large-size laser systems en More details...

Acrylonitrile butadiene styrene (ABS) | Laser cutting and routing

Acrylonitrile butadiene styrene (ABS) | Laser cutting and routing

The CO2 laser systems from eurolaser are ideally suited for the processing of acrylonitrile butadiene styrene CO2 laser systems are an excellent tool for cutting and engraving numerous plastics with  More details...

Protective vests made of aramid fabric | Laser cutting

Protective vests made of aramid fabric | Laser cutting

Laser cutting of technical textiles Bullet-resistant vests are also known as bullet-proof vests in everyday language. Their task: Distribution of the kinetic energy on the impact of bullets, to preve More details...

Invitation made of acrylic | Laser cutting and engraving

Invitation made of acrylic | Laser cutting and engraving

PMMA for creative wedding invitation The invitations to the celebration of the best day of your life can be as individual as the happy couple itself. And if you think of the numerous occasions for wh More details...

PERSPEX® | Laser cutting test

PERSPEX® | Laser cutting test

PERSPEX® CC - Laser cutting of acrylic glass PERSPEX® CC is the ideal material for applications which require excellent optical clarity, surface quality and exceptional thickness tolerance. euro More details...

Foil based control elements | Laser cutting

Foil based control elements | Laser cutting

What decisive difference does laser cutting offer? Non-contact! Laser jet processing is contact free. This characteristic alone offers many advantages. Foil remnants cannot adhere to the tool, the ma More details...

tesa® ACXplus High Adhesion | Laser cutting test

tesa® ACXplus High Adhesion | Laser cutting test

tesa ® and eurolaser Four product groups of tesa ® ACXplus have been tested for their suitability for laser cutting even before their market launch in a close collaboration between tesa ® and eurolas More details...

Parachute silk made of polyamide | Laser cutting

Parachute silk made of polyamide | Laser cutting

Cut with laser precision Light, virtually airtight and colourful – typical properties of parachute silk. Nowadays these synthetic tissues which are made of polyamide fibres as well as Aramide and Dyn More details...

Foam materials | Laser cutting and engraving

Foam materials | Laser cutting and engraving

Foams in the industry The industrial usage of foams has developed a lot in the last few years. Today’s foam market consists of a multitude of different materials for a wide range of applications. For More details...

Ink Printer Module and Label Module | Automation and Options

Ink Printer Module and Label Module | Automation and Options

Laser cutting - labelling - printing Three machining processes in a single operation. Expand the usage areas of the laser system by combining the eurolaser Label and Ink Printer Module options. Labe More details...

Tepex® dynalite - composites - organic sheets  | Laser cutting test

Tepex® dynalite - composites - organic sheets | Laser cutting test

High-performance composites  Maximum strength and particularly high stiffness are the key properties of Tepex® dynalite. The continuous fibre reinforced high-performance composite combines these More details...

Large-format acrylic figures | Laser cutting

Large-format acrylic figures | Laser cutting

Life-size figures from Perspex® for the Lüneburg Museum We used cast 15-mm thick acrylic glass for producing the figures. As some of the figures were to be over 2 m high, we used the XL-1600 or rathe More details...

Kimoto PET films | Laser cutting test

Kimoto PET films | Laser cutting test

Industrial solutions for display screen protection, light diffusion, film keypads Kimoto is a world leader in the manufacture of coated plastic films for technical applications. Its products are used More details...

Filter material | Laser cutting and marking

Filter material | Laser cutting and marking

Because only the best gets through Woven fabrics for filtration are frequently manufactured for technical processes and are often in continuous operation. Whether for the separation of contaminants o More details...

PETG processing with two tools | Laser cutting and routing

PETG processing with two tools | Laser cutting and routing

Combine the advantages of laser cutting and milling PETG sheets are similar in appearance to acrylic glass but they have different properties. PETG, for example, is a lot more stable or resistant, al More details...

Platilon® | Laser cutting test

Platilon® | Laser cutting test

Polyurethane film Platilon® Under the brand name Platilon®, Covestro markets thermoplastic films made from aromatic or aliphatic polyurethane. Due to the excellent results during the cutting tests,  More details...

2 in 1 - Acrylic (6 mm) processing| Laser cutting and routing

2 in 1 - Acrylic (6 mm) processing| Laser cutting and routing

Combine the advantages of laser and routing tools Due to the parallel use of laser and router on one system, yet unexpected opportunities in material processing came possible. Changing between the to More details...

2 in 1 - Acrylic (10 mm) processing | Laser cutting and routing

2 in 1 - Acrylic (10 mm) processing | Laser cutting and routing

Combine the advantages of laser and routing tools Our example demonstrates the machining of a 10 mm acrylic glass sheet (glass look). The cut outer edge and the inner contours of four bore holes shou More details...

Polyester film printed by Canon Océ Arizona | Laser cutting test

Polyester film printed by Canon Océ Arizona | Laser cutting test

Print & Cut - No damage to the print during laser cutting In this test, we want to prove that digital printing is also suitable for industrial production and the printed films can be cut well by  More details...

One machine - three tools parallel | Router, knife, laser

One machine - three tools parallel | Router, knife, laser

Routing, Laser and Knife cutting The basis for our high-performance laser systems are the motion systems of world market leaders Zünd Systemtechnik AG from Switzerland, these systems having been pu More details...

Eiffel Tower made of acrylic (PMMA) | Laser cutting

Eiffel Tower made of acrylic (PMMA) | Laser cutting

The emblem of France made of acrylic glass - only a laser can do this! Whether as a souvenir or architectural model, miniatures can perfectly be cut with a CO2 laser. The fine laser beam provides exc More details...

Plexiglas Resist | Laser cutting and engraving

Plexiglas Resist | Laser cutting and engraving

An alternative to polycarbonate? Every day in our Application Center, different materials are tested for their workability using lasers. This enables the optimum cutting and engraving parameters to b More details...

SMART-X® lightweight boards | Laser cutting test

SMART-X® lightweight boards | Laser cutting test

Visual communications Processing tests in the eurolaser applications lab showed that SMART-X ® can be cut really superbly with CO2 laser cutting systems. The precise and automatic processing opens up More details...

Printed polyester fabrics | Laser cutting

Printed polyester fabrics | Laser cutting

Textile Production - Printing - Finishing The optical recognition system allows the exact cut along the pressure contours. The CCD camera is installed directly in the processing head and plots the ma More details...

Model house | Laser processing and knife cutting

Model house | Laser processing and knife cutting

The flexible all-in-one solution Laser, with its high level of flexibility and fast processing capacity, is the perfect tool for producing architectural and miniature models. The first prototype is r More details...

Plexiglas Resist | Laser cutting and engraving

Plexiglas Resist | Laser cutting and engraving

An alternative to polycarbonate? Every day in our Application Center, different materials are tested for their workability using lasers. This enables the optimum cutting and engraving parameters to b More details...

Polycarbonate front panels | Laser cutting

Polycarbonate front panels | Laser cutting

High demands on processing quality The ‘white goods’ sector includes household appliances such as washing machines, fridges, dryers and all kinds of kitchen appliances. High-quality films are often r More details...

Protective films for display screens | Laser cutting

Protective films for display screens | Laser cutting

Protection against dust and scratching for electrical and electronic equipment More and more electronic and communication equipment offers users high-quality screen surfaces. No method of protecting  More details...

Velcro material | Laser cutting

Velcro material | Laser cutting

Exact cutting of polyester with CO2 laser Velcro is the ideal alternative when it comes to fixing something quickly and then opening it again. The last few years have seen this material being used in More details...

Polyester designer lamps | Laser cutting

Polyester designer lamps | Laser cutting

Laser cut lamp made of 30 pieses Cutting out the individual parts of the foil is child’s play thanks to the laser system. Assembly of the lamp is also made easier, because the smooth cut edges are au More details...

Trophies made of PMMA | Laser cutting and engraving

Trophies made of PMMA | Laser cutting and engraving

And the award winner receives - acrylic Presenting awards and prizes to winners is usually the highlight of an event. This is true both for small sports clubs as well as for international film award  More details...

Acrylics business cards | Laser marking

Acrylics business cards | Laser marking

Produced in a matter of seconds on the QuickMark You can find business cards on every desk. They are usually made of cardboard and somehow they all look alike. So why not try something a bit differe More details...

Coloured acrylic decorations | Laser cutting and engraving

Coloured acrylic decorations | Laser cutting and engraving

Brightly coloured acrylic glass in the advertising industry We have used a peacock sample cut with laser to illustrate as vividly as possible the abundance of colours offered by acrylic glass. It con More details...

Membrane switches | Laser cutting

Membrane switches | Laser cutting

eurolaser offers CO2 laser cutters developed especially for plastic foils Membrane switches must always remain operational under special conditions. Durability, soiling and water resistance as well a More details...

Automated sprue removal | Laser cutting

Automated sprue removal | Laser cutting

Reduce costs and increase quality On the one hand, automation means reducing the use of personnel and increasing manufacturing quality. On the other, more economic production processes require reliab More details...

Sign made of acrylic and Dibond | Laser cutting and routing

Sign made of acrylic and Dibond | Laser cutting and routing

This example shows a combination of laser cutting and routing The base plate of the sign is made from Dibond ®, an aluminium and polyethylene compound. This material is particularly outstanding becau More details...

Fleece finishing | Laser engraving

Fleece finishing | Laser engraving

Haptics thanks to laser embossing This technology is particularly advantageous for discreet lettering as the logos, images, letters etc. appear tone-in-tone on the engraved material. That is why colo More details...

Fully-automatic production line | Laser cutting

Fully-automatic production line | Laser cutting

Fully-automatic processing of technical textiles This video shows the fully-automatic processing of technical textiles for the automotive branch. The laser system is fully integrated in the productio More details...

Cookie settings

Settings for your privacy

This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.